Gas Liquid Dual-Use Pressure Calibration Table

• Customization: Available
• After-sales Service: Factory After Serice by Real Time
• Warranty: 1 Year
• Model NO.: ALKT785
• Application: Chemical Instrument, Thermal Power, Mechanical Instrument, Electromagnetic Instrument
• Power: Pressure
• Certification: ISO9001
• Customized: Customized
• Transport Package: Carton
• Specification: 530x440x225mm
• Trademark: AILEIKE
• Origin: Jiansu
• HS Code: 9031809090
• Production Capacity: 5000
• Package Size: 53.00cm * 44.00cm * 22.50cm
• Package Gross Weight: 16.000kg
• Lead Time: 5 days (1 - 5 Pieces) ; 7 days (6 - 10 Pieces) ; 15 days (11 - 50 Pieces) ; To be negotiated ( > 50 Pieces)

Product Description

01	02
Stainless steel material Corrosion and oxidation resistance Use more durable materials	Suppressing easily Multiple measuring ranges Customizable according to requirements

1	Output port 1	Connect standard table or inspected table
2	Output port 2	Connect standard table or inspected table
3	Output port 3	Connect standard table or inspected table
4	Output port 4	Connect standard table or inspected table
5	Pneumatic piston	Gas generating device
6	Pneumatic lever	Drive the piston rod to move and generate pressure through operation
7	Fine adjustment of air pressure	Increase or decrease pressure within a small range
8	Positive and negative pressure switching valve	Press in to measure positive pressure, pull out to measure negative pressure
9	Air pressure relief valve	Close during pressurization and release gas at the end of measurement
10	Pneumatic pump body	Combination installation of various components
11	Nameplate	Product Name Model Specification
12	Hydraulic pressure rod	Increase pressure through operation
13	Injection port	Add purified water or calibration oil
14	Hydraulic pressure relief valve	Close during pressurization and open during depressurization
15	Hydraulic vernier	Increase or decrease pressure within a small range

Product name	Gas liquid dual-use pressure calibration table
Model	ALKT785
Pressure range	Air pressure -0.05~60Bar/Hydraulic pressure 0~600Bar/0~1000Bar
Measurement medium	Clean air/purified water orTransformer oil 25# (choose one)
Way of pressure	Hand movement
Ambient temperature	0~50ºC
Output port	Four
Thread specification	Quick connect thread (M20 × 1.5)
Cover form	Air pressure min 10Pa/hydraulic pressure min 0.01bar
Product size	500×410×195mm
Product weight	Approximately 14kg
Package size	530×440×225mm(packaging material is cardboard box)
Package weight	Approximately 16kg
Product standard configuration	Certificate of conformity x 1 Instruction manual x 1 Warranty card x 1 Sealing ring x 4 4 plugs

Working principle and usage

Hydraulic pressure

Unscrew the plug on the hydraulic output port and adjust the fine adjustment to the appropriate position (middle position). Close the pressure relief valve and gently operate the lever to allow the pressure guiding liquid to reach the two pressure output ports. Reinstall the standard gauge and the inspected gauge, operate the pressure rod, apply pressure to around 300Bar, use fine-tuning to adjust to the required pressure, and check point by point until the full range is reached. After inspection, open the pressure relief valve to reset the pressure to zero. After the pressure relief is completed, the inspected table and standard table can be removed.

Air pressure

Positive pressure: Unscrew the plug on the air pressure output port, install the standard gauge and the calibrated gauge, push the positive and negative pressure switching valve into the positive pressure position, close the pressure relief valve, rotate the micro adjustment counterclockwise to the farthest position, and use the pressure rod to apply the required pressure. If the required pressure is too high and the pressure of the inflation rod cannot be reached, you can use the micro adjustment to adjust it to your desired pressure. After calibrating and releasing the pressure, you can remove the calibrated gauge and the standard gauge.
Negative pressure: Install the standard gauge and the calibrated gauge, pull out the positive and negative pressure switch to the negative pressure position, rotate the micro adjustment counterclockwise to the maximum position, close the pressure relief valve, and use the pressure rod to apply pressure to your desired pressure. When the pressure is close to the desired value, use the micro adjustment to adjust to your desired pressure. After calibrating the gauge and releasing the pressure. Remove the inspected table and standard table.

Attention: 1,Do not switch pressure under pressure 2,Do not suck debris into the pump

Points for attention

1,The pressure table should be placed on a flat and easy to operate surface, avoiding use in environments with highly corrosive gases and dust particles.
2,The tested instrument should be cleaned appropriately to prevent stains from entering the detection circuit.
3,The output port connector is a corresponding quick connector with a sealed end face. When installing the instrument, no tools are needed, and it can be tightened evenly. When the sealing surfaces are tightly attached to each other, it can be tightened 1-2 turns.
4,The output port connector is composed of two parts, top and bottom. When using, the lower locking screw should be checked regularly to ensure reliable connection. If the connection is not reliable, it may cause breakage under high pressure.
5,When the pressure generated by the lever is heavy, please use fine-tuning to increase the pressure, which will be easier.