Flow Meter Thermal Gas Mass Flow Meter DN100 Pipeline Type

• Customization: Available
• After-sales Service: Factory After Serice by Real Time
• Warranty: 1 Year
• Model NO.: DN100 pipeline type
• Size: DN100 Pipeline Type
• Sensor: Pipeline Type/Plug-in Type
• Application: Industrial Production
• Type: Thermal Gas Mass Flowmeter
• Measuring Principle: Mechanics
• Measurement Object: Open Channel
• Certification: ISO
• Transport Package: Carton
• Trademark: AILEIKE
• Origin: Jiangsu
• HS Code: 9026801000
• Production Capacity: 5000
• Package Size: 60.00cm * 80.00cm * 50.00cm
• Package Gross Weight: 15.000kg
• Lead Time: 5 days (1 - 5 Pieces) ; 7 days (6 - 10 Pieces) ; 15 days (11 - 50 Pieces) ; To be negotiated ( > 50 Pieces)

Product Description

Product Display
01	02	03
LCD display	Dual power supply mode	Flange material
Intelligent LCD meter head Instantaneous flow/ Cumulative flow Same screen display Easy to read	DC 24V Communicate with 220V	Made of stainless steel material Good toughness and high temperature resistance Long term use is not easy to rust

Performance	Technical parameters
Structural style	Plug-in	Pipeline type
Measurement medium	Various gases (excluding acetylene gas)
Pipe diameter range	DN50~2000mm	DN20~300mm
Flow rate range	0.1~120Nm/s
Accuracy	±1~2.5%
Operation temperature	-10~100ºC
Working pressure	Medium pressure ≤ 1.6MPa
Power supply	DC 24V+AC 220V (dual power supply)
Response speed	1s
Output signal	4-20mA (photoelectric isolation, maximum load 500 ohms),pulse, RS-485 (photoelectric isolation)
Give an alarm	1-2 relay normally open contacts, 10A/220V/AC, 5A/30V/DC
Supply type	Split structure, integrated structure
Pipe Material	Carbon steel, stainless steel, plastic, etc
Local display	Four line Chinese character LCD display
Show contents	Mass flow rate, standard condition volume flow rate, cumulative flow rate,standard time, cumulative operating time, standard flow rate, etc
Protection grade	IP65
Sensor material	Stainless steel

Structural function
1,Prompt Line	2,Instantaneous flow rate
3,Instantaneous flow rate	4,Traffic percentage
5,Instantaneous flow unit	6,Accumulated total amount Decimal parts and units
7,Medium flow rate

Instantaneous flow units: Instantaneous units include Nm³/h/Nm³/min,NL/h,NL/min,t/h,t/min,kg/h,kg/min
Accumulated units: Accumulated flow units include Nm³,NL,t,kg

Structural function
Nominal Diameter	DN	15	20	25	32	40	50	65	80	100
Flange outer diameter	D	95	105	115	140	150	165	185	200	220
Center hole diameter	K	65	75	85	100	110	125	145	160	180
Screw hole	nxL	4x14	4x14	4x14	4x18	4x18	4x18	4x18	8x18	8x18
Thread specification		M12	M12	M12	M16	M16	M16	M16	M16	M16
Sealing surface	d	45	55	65	78	85	100	120	135	155
	f	2	2	2	2	3	3	3	3	3
Flange thickness	c	12	14	14	16	18	18	20	20	22
Instrument installation length	l	170	170	170	170	170	170	190	190	200

Nominal Diameter	A	B
DN65~DN500(contain)	565	370
DN500 and  above~DN1000	825	630

Selection Table										Remarks
Enterprise standard	ALK									enterprise standard
code		E23A								Pipeline type
		E23B								plug-in
Nominal Diameter			XXX							DN20-2000
temperature range				W						-10~100ºC
nominal pressure					Y1					≤1.6MPa(default)
					Y2					≤4.0MPa
Measurement medium						Q				Gas (excluding acetylene)
OUTPUT							S			4-20mA+RS485 MODBUS
Power supply mode								D		220V AC+24V DC

Installation requirements
1. The length of the straight pipe section of the measured pipeline at the installation site of the flowmeter should meet the following requirements as much as possible: 20D upstream and 10D downstream (D is the inner diameter of the pipeline)
By using our company's rectifier flowmeter (diameter ≤ DN100), the length requirements for the front and rear straight pipe sections can be greatly reduced.
2. The flow regulating valve should be installed as much as possible below 10D downstream of the flowmeter, and if it must be installed at the front end, it should also be kept as far away from the measuring point as possible.

Terminal block instructions and wiring methods

1,Give an alarm	2,AC85~230V
3,AC 220V Fuse	4,4-20mA output
5,RS-485	6,Pulse output
7,DC24