Aileike Alkb601 Portable Vacuum Pump Positive and Negative Pressure Gauge Gas Signal Generator Instrument for Measuring Pressure -0.95~16bar

• Customization: Available
• After-sales Service: Factory After Serice by Real Time
• Warranty: 1 Year
• Model NO.: ALKB601
• Application: Chemical Instrument, Thermal Power, Mechanical Instrument, Electromagnetic Instrument
• Power: Pressure
• Certification: ISO9001
• Customized: Customized
• Transport Package: Carton
• Specification: 320× 200× 160
• Trademark: AILEIKE
• Origin: Jiansu
• HS Code: 8414200000
• Production Capacity: 5000
• Package Size: 33.00cm * 25.00cm * 23.00cm
• Package Gross Weight: 5.000kg

Product Description

1	2	3	4	5	6	7
Air delivery valve Close when pressurizing At the end of the measurement Discharge gas	Output 1 Connect standard meter or checked meter	Output 2 Connect standard meter or checked meter	Fine-tuning Increase in small scale or decrease the pressure	Pressing rod Pass through operating band moving piston column movement	Switching valve Positive pressure pushing and negative pressure pulling out (Do not switch with pressure)	Anchor Flat placement contributes to stability

Product name	Portable air pump
Model	ALKB601
Pressure range	-0.95~16bar
Regulating fineness	10pa
Output port	Two
Pressure connection	The default thread size for the pressure output port is M20 × 1.5(F). If you need other thread sizes, please contact us for consultation.
Ambient temperature	-10°C~60°C
Measurement medium	Clean air
Way of Pressure	Hand movement
Net weight	Approximately 3.8kg
Product size	280×200×180mmm
Weight after packaging	Approximately 5.0kg
Product packaging size	330×250×230mm
Product standard configuration	Certificate of conformity x 1 Instruction manual x 1 Quality assurance card x 1 Sealing ring x 2 Plugs x 2

Usage Method


1. The air pressure pump should be placed on a workbench that is easy to operate and kept level.
2. The working environment temperature should be -10~60 ºC, the relative humidity should not exceed 80%, and the surrounding air should not contain corrosive gases.
3. The workbench needs to be stable. Do not be subjected to vibration during use
4. Usage: Positive pressure detection - unscrew the plug on the output port, adjust the fine adjustment to the appropriate position (middle position), close the air delivery valve, connect the standard gauge and the inspected gauge, tighten the standard gauge and the inspected gauge, slowly apply pressure to the required range by operating the lever, and use the fine adjustment to adjust to the calibration point.
5. Negative pressure detection - unscrew the plug on the output port connector, adjust the fine adjustment to the appropriate position (middle position), pull out the switching valve, connect the standard meter and the inspected meter, and close the air delivery valve. Operate the lever to evacuate to the desired range and use fine-tuning to adjust to the calibration point.
6. Do not use switching valves under pressure
7. There should be no liquid in the pressure chamber of the tested instrument

Maintenance and Repair


1.When not in use, it is necessary to cover the instrument with a cloth cover to prevent dust from entering.
2. Avoid using in environments with highly corrosive gases and dust particles.
3. Regularly wipe all parts of the pressure pump, and no liquid should enter the instrument during measurement.