| Customization: | Available |
|---|---|
| After-sales Service: | Factory After Serice by Real Time |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Turbine Flowmeter | |
| Specifications | Price (Unit: USD) |
| DN4~10 thread (with display) | 258 |
| DN15 thread (with display) | 199 |
| DN20 thread (with display) | 204 |
| DN25 thread (with display) | 209 |
| DN32 thread (with display) | 240 |
| DN40 thread (with display) | 254 |
| DN50 thread (with display) | 258 |
| DN65 flange (with display) | 331 |
| DN80 flange (with display) | 376 |
| DN100 flange (with display) | 423 |
| DN125 flange (with display) | 615 |
| DN150 flange (with display) | 723 |
| DN200 flange (with display) | 1310 |
| DN4-10 thread (not shown) | 157 |
| DN15 thread (not shown) | 98 |
| DN20 thread (not shown) | 105 |
| DN25 thread (not shown) | 108 |
| DN32 thread (not shown) | 139 |
| DN40 thread (not shown) | 153 |
| DN50 thread (not shown) | 157 |
| DN65 flange (not shown) | 230 |
| DN80 flange (not shown) | 276 |
| DN100 flange (not shown) | 323 |
| DN125 flange (not shown) | 513 |
| DN150 flange (not shown) | 623 |
| DN200 flange (not shown) | 1208 |
| Product Display | |||
| 01 | 02 | 03 | 04 |
| Explosion proof case |
High quality 304 stainless steel |
Precision milling impeller |
On Battery |
| High quality waterproof and dustproof shell Not aging No cracking |
Exquisite craftsmanship, not easy to rust High temperature and wear resistance Good resilience |
Accurate an long-lasting Ensure the smoothness of the fluid Not easily broken or stuck, with a long service life |
Simple replacement long life |
| Product Information | |
| Product name | Turbine Flowmeter |
| Measurement accuracy | Level 0.5, Level 1.0 |
| Nominal Diameter | DN4-DN200MM |
| Setting Range | 1.0MPa 1.6MPa 2.5MPa 4.0MPa 6.3MPa (high pressure customizable) |
| Output | -20ºC~ 60ºC |
| Humidity | 5ºC~95ºC |
| Atmospheric pressure | 0.86bar~1.06bar |
| Protection grade | IP65 (default) IP68 customizable |
| Power supply | 3.6V lithium battery (default), 24VDC |
| Output signal | Three wire pulse, two-wire 4-20mA, RS485, HART |
| Medium temperature | -20 ºC~100 ºC (high temperature can be customized) |
| Viscosity | Less than 5x10-6M2/S (liquids greater than 5x10-6M2/S) (Used after real liquid calibration) |
| Measurement medium | Liquids (conductive liquids such as water, refined oil, light crude oil, organic liquids, inorganic liquids, etc.) |
| A | B | C | D | 1 | 2 | 3 |
| Digital display type | No display 4-20mA signal type |
Pulse explosion -proof type |
Pulse non display type |
Flange sensor | Clamp sensor | External thread sensor |
| Selection Table | Remarks | ||||||||
| Enterprise standard | ALK | Enterprise standard | |||||||
| Code | E22A | Integrated | |||||||
| E22B | Split type | ||||||||
| Nominal Diameter | XX L | Thread DN4-50 optional | |||||||
| XXX F | Flange DN15-200 optional | ||||||||
| XX K | Clamp DN15-50 optional | ||||||||
| XXX C | Plug in DN100 or above optional | ||||||||
| XX J | Clamp on DN15-50 optional | ||||||||
| OUTPUT | A | ||||||||
| B | |||||||||
| C | |||||||||
| D | |||||||||
| E | |||||||||
| R | |||||||||
| H | |||||||||
| Table body material | D1 | 304/pipe body and flange (or clamp joint) |
|||||||
| D2 | 316/pipe body and flange (or clamp joint) |
||||||||
| Material of the movement | E1 | 2Cr13 impeller | |||||||
| E2 | Dual phase steel impeller and guide components |
||||||||
| Pressure | Y1 | 1.0MPa is suitable for clamp connection forms |
|||||||
| Y2 | 1.6MPa is suitable for DN15-100 |
||||||||
| Y3 | 2.5MPa for 4/6/10 threaded connections |
||||||||
| Y4 | High voltage customization | ||||||||
| Accuracy | J1 | 1.0 Standard Accuracy | |||||||
| J2 | 0.5 high precision | ||||||||
| Nominal Diameter (mm) |
L(mm) | H(mm) | G | L(mm) | D(mm) | d(mm) | Number of holes |
|
| ALKE22-4 | 4 | 275 | 145 | G1/2 | 215 | |||
| ALKE22-6 | 6 | 275 | 145 | G1/2 | 215 | |||
| ALKE22-10 | 10 | 455 | 165 | G1/2 | 350 | |||
| ALKE22-15 | 15 | 75 | 173 | G1 | ||||
| ALKE22-20 | 20 | 85 | 173 | G1 | ||||
| ALKE22-25 | 25 | 100 | 173 | G5/4 | ||||
| ALKE22-32 | 32 | 140 | 175 | G1 1/2 | ||||
| ALKE22-40 | 40 | 140 | 178 | G2 | Ф110 | Ф18 | 4 | |
| ALKE22-50 | 50 | 150 | 252 | G2 | Ф125 | Ф18 | 4 | |
| ALKE22-65 | 65 | 180 | 278 | Ф145 | Ф18 | 4 | ||
| ALKE22-80 | 80 | 200 | 287 | Ф160 | Ф18 | 8 | ||
| ALKE22-100 | 100 | 220 | 322 | Ф180 | Ф18 | 8 | ||
| ALKE22-125 | 125 | 250 | 347 | Ф210 | Ф18 | 8 | ||
| ALKE22-150 | 150 | 300 | 367 | Ф250 | Ф22 | 8 | ||
| ALKE22-200 | 200 | 360 | 415 | Ф295 | Ф22 | 12 |
| Instrument caliber (mm) |
Normal flow range (m3/h) |
Expand traffic range (m3/h) |
Conventional stress tolerance (MPa) |
| DN4 | 0.04-0.25 | 0.04-0.4 | 6.3 |
| DN6 | 0.1-0.6 | 0.06-0.6 | 6.3 |
| DN10 | 0.2-1.2 | 0.15-1.5 | 6.3 |
| DN15 | 0.6-6 | 0.4-8 | 6.3,2.5(flange) |
| DN20 | 0.8-8 | 0.45-9 | 6.3,2.5(flange) |
| DN25 | 1-10 | 0.5-10 | 6.3,2.5(flange) |
| DN32 | 1.5-15 | 0.8-15 | 6.3,2.5(flange) |
| DN40 | 2-20 | 1-20 | 6.3,2.5(flange) |
| DN50 | 4-40 | 2-40 | 2.5 |
| DN65 | 7-70 | 4-70 | 2.5 |
| DN80 | 10-100 | 5-100 | 2.5 |
| DN100 | 20-200 | 10-200 | 1.6 |
| DN125 | 25-250 | 13-250 | 1.6 |
| DN150 | 30-300 | 15-300 | 1.6 |
| DN200 | 80-800 | 40-800 | 1.6 |
){kind=link}